EROPS (Cab), A/C, Heat, Bucket w/Teeth | Machine Was Purchased New And Dealer Maintained Its Entire Life. Runs Exactly Like It Should And Is Equivalent To A Caterpillar 980M Wheel Loader | Engine Make And Model, Cummins QSM11 Tier 4 Final Stage V EPA Tier 2-3 Depending On Region Gross Power, Around 375–385 Hp At 1,800 Rpm Net Power, Around 356–371 Hp At 1,800 Rpm Displacement, Approximately 10.8–11.8 L Peak Torque, Approximately 1,776 Nm At 1,400 Rpm Transmission And Drivetrain Type, ZF Power-Shift Countershaft Model 4WG310 With Single-Stage Torque Converter Gear Speeds, 4 Forward / 3 Reverse Shift Modes, Manual Semi-Auto Full-Auto With FNR And Kick-Down Features Hydraulics System, Two Load-Sensing Axial Piston Pumps With Priority Steering Main Relief Pressure, 26 MPa Cycle Time 11 Seconds Lift Dump Return Breakout Force, Approximately 55,000 Lbf Capacities And Weights Operating Weight, About 67,400–68,900 Lb Fuel Tank, 128 Gallons Hydraulic System Capacity, 67 Gallons Engine Oil 8.7 Gallons Cooling System 10.8 Gallons Transmission And Torque Converter 13 Gallons Each Axle 17 Gallons Rated Load Capacity, About 19,800 Lb Loader Performance Bucket Capacity, 7.1 Yd³ Standard Options From 5.9 Yd³ To 11.8 Yd³ Tipping Load Full Turn, About 45,400 Lb Dump Clearance At Full Height, 10 Ft 11 In Dump Reach At Full Height, 4 Ft 10 In Dimensions And Mobility Overall Dimensions With Bucket Down, 30 Ft 8 In Long 10 Ft 5 In Wide 12 Ft 4 In High To Cab Turning Radius, Outside Of Tire About 23 Ft Bucket Carry About 25 Ft 4 In Travel Speed, Forward About 24 Mph Reverse About 16.5 Mph

• Heavy Duty Rock Bucket 5.25yd³