2025 Skid Steer
EROPS (Cab), A/C, Heat, High Flow Hydraulics, Hydraulic Actuated Coupler, No Def, 78" Bucket w/Edge, Brushcutter Available for $10,000, Warranty Chassis & Structural Components: 5 Years / 5,000 Hours, Major Components: 3 Years / 3,000 Hours, Engine: 2 Years / 2,000 Hours--------Engine: Yanmar 4TNV98CT-NTY, Tier 4 Final Rated Power: 72 HP @ 2,500 RPM Operating Weight: 10,692 LBS Rated Operating Capacity: 2,992 LBS Tipping Load: 8,549 LBS Bucket Capacity: 0.78 YD³ Breakout Force (Bucket): 7,425 LBF Breakout Force (Boom): 6,300 LBF Hydraulic Flow: Standard 25.1 GPM, High Flow 37.6 GPM Travel Speed: 5 MPH (Low), 8.75 MPH (High) Lift Height To Hinge Pin: 10.8 FT Features ROPS/FOPS-Certified Enclosed Cab With Heat And Air Conditioning Rearview Camera Hydraulic Quick Coupler ISO/H Pattern Joystick Controls Two-Speed Travel Engine Block Heater Rotating Beacon Ground-Level Service Access With Swing-Open Cab 12V Power Supply Emergency Brake Switch Toolkit Included Steering Lock Fuel Level Gauge Water Level Indicator Maintenance-Free Steering Cylinder Bearings Independent Front And Rear Control Double Joysticks
We support both short and long hauls across state lines. Transportation is not included in your rental rate. Once an order is placed you will receive a quote within 1 business day.
Equipment can be used for 160 hours per month throughout the length of the rental. Total usage is calculated cumulatively over the entire rental.
Any hours used over the 160-hour cumulative monthly limit will be charged at the end of the rental and will appear on your final statement.
You are free to extend a rental as needed.
To receive a full refund, cancellations must be made at least 24 hours before the first machine in the order is picked up. Charges may apply for cancellations made after this period.
Newark Equipment Rental Service Managed Services